Let's go back to boot camp...Exposure - the basics 101

Alrighty then. So we now have a nice camera but learning to work the thing is a bit intimidating.


It does not help much when the wife comes hopping and skipping along, sporting a better pic with the trusty old compact which was handed down to her as it was now completely redundant.

The D-SLR now rules supreme...who wants a compact? Those are for girls...or wives...who keep telling us that there was nothing wrong with the old humble compact because, after all looky here at the pic I got which is so much better with the pic YOU got and that was a lot of money to spend and look, you are not even getting the same results as you used to...

Sound familiar?

Let's kick some D-SLR butt and take things back.

For a start, that nice new toy is NOT a camera. It might be shaped like a camera but that is part of the deceit. This is a camera.

And yes, I used to do weddings with that very camera and a second one like it.

Now I am not about to start waffling, there is a point to this but in the days of this camera, the camera itself was important but it played a very small role in the actual photo that it produced. As long as it was not leaking light onto the film and wound the film on accurately that was it.



For different effects we would use Agfa or Fuji of whatever kind, Velvia, Provia, Ilford for black & white...FP-4 or HP-5.

And you had 36 frames before you had to rip out the canister and replace it with a fresh one.

Sadly this has changed a bit...and therein lies the rub!


Instead of using our favourite film we are confronted with this

On this trusty old K-1000 there was a very mechanical control knob with shutter speeds ranging from "B" to 1/1000 second with speeds like 1/4,  1/8,  1/15  1/30,  1/60 of a second and so on. Which used to be the maximum flash sync speed by the way! No half-stops or one-third stops there!


The lens aperture was controlled by a mechanical ring on the lens like the ones still seen on Nikon's "D" lenses. Again there were very little half-stops and definitely no one-third stops.

ISO was simple. Film was rated to 100, 200, 400 or 800 if you could afford and get it. And do remember that you had to use it up and replace with another one. No press of a button to flip from 200 to 1600. If you had just put in a 36 spool that was a bit of a problem to open in a darkroom, cut and...oh no.

OK, enough of that, fast forward to the present day.

Now we have "cameras" that present us with pretty little screens containing all sorts of menus and sub-menus and very little to do on the main dial knobs. What we do have is a rather confusing array of double-function buttons and too many screens to check for settings. Like this here:

Now, before I hear any Nikon users giggling about their superior menus, that is not the case and you know it. I am privileged to play with both systems regularly and they are both easy but they can both be confusing.

Now we have clearly identified the problem but where do we start to fix it?

Quite simple really. We get back to basics. BIG TIME!

Much has been said about the "3 Kings of photography" or whatever you want to call them. They are Shutter Speed, Aperture and Sensitivity (or ISO if we must...)

Here follows some Geekspeak...scroll past if you like or read on if it works for you.

ISO is a French organisation and, as such their word order is regularly different from the civilised world...should I have said rest of the civilised world...

ISO is the "International Organisation for Standardization" when the French word order is taken into account and I will not even try to repeat the proper French styling.

Fact is, that is now the standard that used to be the well-known American "ASA" ( American Standards Association...a bit of a misnomer, yes, I know...). ASA in itself is a linear scale of sensitivity which ran parrallel  to the German logarithmic DIN (Deutsche Internazionale Norme)

You would possibly be happy to know that the Russians had their own system called GOST which was fairly similar to ASA and there were several other lesser known systems...

Hurter & Driffield (H & D) 

Weston  

B.S. I (Index) - a long-outmoded logarithmic British Standard scale and more...

Thank goodness for ISO, my head hurts already.

So, ISO in this context then, is simply a system of measuring sensor or the film's sensitivity to light in a controlled standard.

Shutter speed is the duration of time over which a little set of curtains inside the camera exposes the film (or sensor nowadays) to the image projected by the lens. 

Shutter speed used to be simple as seen on the old workhorse above but nowadays we have all sorts of intermediate numbers for greater precision and greater control over the resulting image.

Now for the big problem because this is where the wheels normally come off for most!

Aperture.

Call him Aperture, call him f/stop or whatever you please, this is the backward little black sheep cousin of the family who is bound to cause some frustration because he does not seem to make any sense at first.

The word f/stop originates from the forefathers of this village idiot, very likely due to the origins of the "stops" on the mechanical ring on the lens barrel.

This is what it used to look like...

Now, please note the little orange yellow diamond forward of or above the white numbers on the ring at the red arrow. From it's fixed position against the moveable white numbers indicated by the arrow you will notice that the aperture inside the lens is set to halfway beteween 5.6 and 4. Turning this ring either way it would click into "stops" directly corresponding with the numbers or at "half stops" perfectly halfway between them.

Because of these mechanical "stops" on the lens barrel aperture ring, any adjustment in exposure is nowadays loosely referred to as f stop adjustments. Also, please note the existence of a concept called EV or Exposure Value. You will come across the term on some sites.

EV 0 implies a one second exposure at f/1.0 . 

EV 1 would be an exposure of half that value of light whether by reducing exposure time or decreasing aperture size.

EV 2 would be an exposure of half the value of light of EV 1.

Each Exposure Value, or EV, represents any of many different but equivalent combinations of f/stop and shutter speed. For instance, 1/250 at f/8 is EV14, and so is 1/125 at f/11. 1/125 at f/8, one stop more exposure, is EV13, and 1/250 at f/11, one stop less exposure, is EV15.

EV seems to be important when hand-held light meters are used and I have never had a use for those but now you have an idea what that is about.

OK, so now that we know where f/stops come from and why they are generally used to describe adjustments to exposure, let us start tying up the loose ends.

That is great to know but the numbers make no sense I hear you say...

They are "f/stops"...or Fstops or f-stops or however you want to write it but the pure form would be f/stop as it is really a little mathematical formula where f = the focal length / stop or, simply put,

f (focal length of the lens / the white number (4, 16, 1.4 or whatever)

What the ...insert expletive here if you so wish...

Simple really. 

Let us deal with a 50mm lens. You can read more about the 50mm prime lens on my other equipment related blog here:

http://shootingwideopen.blogspot.com/2010/07/back-to-basics-old-school-style.html

The 50mm is the focal length.

Therefore, f/stop or 50mm / 4 = 12.5 mm. Simple!

A 50mm lens set to f/4 will have an aperture opening of twelve and a half millimeter in diameter.

Set the same 50mm lens to f/22...or, more mathematically, 50/22 and you will find that the aperture opening is now 2.27 mm in diameter.

Open it up to f/1.4...you guessed it, 50/1.4 and you will find that the aperture opening now has a diameter of 35.714 mm.

This should explain why big f/ numbers make small apertures and small f/ numbers make big apertures inside the lens.

Lovely and fascinating to know but how does this have a bearing on controlled adjustments to exposure?

We have seen by now that ISO or Sensitivity and Shutter speed (without half-stops and one-third stops) were very predictable and linear. Every adjustment was half or double the value of it's neighbour...

Those who would like to do so can now go and revisit primary school maths, the little guy pi or π , (22/7) and the formula for calculating the area of a circle:  π x r squared.

Those weird numbers 2,  4,  5.6,  8,  11,  16 and so on are mathematically correct to give aperture opening sizes exactly half or double the area of the neighbour.

So, from the other end, a circle with a diameter or radius of 16 mm will have an area of double that of a circle with a diameter or radius of 11 mm.

The dots should start to join up by now, yes?

That is the relation among our three kings of exposure! Every adjustment upwards or downwards results in a known quantity of light being controlled.

Now then, the mission is to go and find how to control those three guys on your camera. Keep playing until you can adjust any combination of them instinctively.

Coming up in the next part:

Av, Tv, "Manual", A, S and "Program" (Depends whether you shoot Nikon, Canon or another...) and the greatest villain of them all exposed...the Darth Vader of Photography and your biggest enemy to conquer...your camera's light meter!